| Model |
HY-8000S |
HY-8200S |
HY-72D |
HY-48D |
| Appearance |
|
|
|
|
| W × H × D (mm) |
96×96×125 |
96×96×125 |
72×72×110 |
48×48×100 |
| Power Voltage |
110 / 220 V a.c (50 / 60 ㎐) |
| Power Consumption |
3 VA |
| Input |
Input(Sensor type) selection by the configuration suffix code. |
| a) Thermo couple : K, J, R b) R.T.D : KPt100 Ω(KS), Pt100 Ω(IEC 751) |
| c)DC current : 4 to 20 mA d) DC voltage : 1 to 5 V DCnt |
| Control Output |
Relay contact : 250 V AC 3 A (Resistive load), SSR: 12 V DC (Constant voltage pulse) |
| [Load resistance min. 800 Ω], Current: 4 – 20 mA DC [Load resistance max. 600 Ω) |
| Control Method |
Proportional or ON/OFF control |
| Alarm Output |
– |
Relay contact : |
– |
| 250 V a.c 3 A |
| Setting Method |
By B.C.D S/W |
| Permissible input resistance |
Thermocouple : Max. 250 Ω, R.T.D : Max. 10 Ω |
| Indication range |
Setting temperature range |
| Display |
L.E.D Display |
| Setting and display accuracy |
Set Value : ±1.0 % of F.S, Display : ±0.5 % of F.S |
| Control sensitivity |
Approx 0.2 % F.S (Fixed) |
| Proportional Cycle |
Relay contact : 25 ~ 30 sec SSR : 2 ~ 4 sec |
| Reset Range |
Max. ± 1.5 % of Range |
| Dielectric Strength |
2,000 V AC 50/60 ㎐ for 1 minute (Primary terminal-secondary terminal) |
| Vibration |
Resistance |
2 – 55 ㎐, X · Y · Z each position for 10 minutes |
| Durability |
10 – 55 ㎐, X · Y · Z each position for 2 hours |
| Shock |
Resistance |
100 ㎨ 6 positions, each 3 times |
| Durability |
300 ㎨ 6 positions, each 3 times |
| Life |
Mechanical |
Min. 10 million times (Relay type) |
| Electrical |
Min. 0.3 million times (Relay type) |
| Ambient temperature and humidity |
0 ~ 50 ˚C(32 ~ 122˚F) · 35 ~ 85 % R.H. (Without freeze) |
