Mô tả
| Product Line | Oriental Motor ® |
| Motor Type | AC Motor |
| Frame Size | 3.15 in |
| Output Power | 25 W (1/30 HP) |
| Power Supply | Single-Phase 110/115 VAC |
| Frequency (Hz) | 60 |
| Current | 0.74 A |
| Shaft/Gear Type | Parallel Shaft Gearhead |
| Gear Ratio (X:1) | 30:01:00 |
| Output Shaft Diameter | 3/8 in. |
| Permissible Torque | 38 lb-in |
| Variable Speed Range (r/min) | 3 ~ 53 |
| Permissible Load Inertia | 1530 oz-in² |
| Permissible Overhung Load | 0.39 in. from Shaft End = 45 lb0.79 in. from Shaft End = 67 lb |
| Permissible Thrust Load | 11.20 lb |
| Max. Extension Length (m) | 4.75 |
| Components | USP425-1U2 (Control Unit)USM425-401W2 (Motor)4GN30SA (Gearhead) |
| RoHS Compliant | Yes |
| Safety Standards | ULCSACCCENCE |
| CE Marking | Low Voltage DirectivesEMC Directive |
| Insulation Resistance | [Motor] 100 M Ω or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.[Control Unit] 100 M Ω or more when 500 VDC megger is applied between all the pins and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | [Control Unit] Sufficient to withstand 2.3 kV at 60 Hz applied between all the pins and the case for 1 minute after rated operation under normal ambient temperature and humidity.[Motor] Sufficient to withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| Insulation Class | [Motor] Class B (266°F [ 130°C]) |
| Ambient Temperature Range | [Motor] 14°F ~ 104°F (-10°C ~ 40°C) (nonfreezing)[Control Unit] 32°F ~ 104°F (0°C ~ 40°C) (nonfreezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Degree of Protection | [Motor] IP20[Control Unit] IP10 |
