image

Driver Điều Khiển Motor Servo HNC 1kW HSD2-020


Hãng sản xuất: HNC

Mã thiết bị: HSD2-020

Bảo hành: 12 Tháng

Xuất xứ: Trung Quốc

Tình trạng: Còn hàng

Xem thêm các Driver Servo khác.

Xem thêm các Driver Servo của HNC.


Giá liên hệ

Với số lượng lớn, xin quý khách vui lòng liên hệ trực tiếp để được giá tốt hơn.

Số lượng

Chia sẻ sản phẩm này

Thông số kĩ thuật
Type HSD2-015
(0.75kW)
HSD2-020
(1W)
HSD2-030
(1.5kW)
HSD2-050
(2.5kW)
HSD2-075
(4kW)
Power supply Three-phase: AC220V -15%~+10%   50/60Hz
Environ Temperature Operation:0~40°C Storage:-40~50°C
ment Humidity Operation:40%~80%(non-condensing) Storage:Below 93%(non-condensing)
IP rating IP20
Control of main circuit SVPWM control
Regeneration Built-in
Feedback type 2500 ppr incremental encoder, 2500ppr wire saving encoder (10000 resolution)
Control mode Position
Analog input -10V~+10V,input resistance 10K
Digital input Five programmable input terminals (optical isolation).
Functions are: Servo-ON, Alarm clear, CCW over-travel inhibition, CW over-travel inhibition, CCW torque limit, CW torque limit, Emergency stop, Electronic gear select 1, Electronic gear select 2, Position deviation clear, Pulse input inhibition.
Digital outputs Three programmable output terminals (optical isolation),
Functions are: Servo ready, Servo alarm, Positioning complete, At speed reached, Electromagnetic brake release, Torque in-limit.
Encoder signal outputs Signal type A、B、Z (Differential output line driver), Z signal (open collector output)
Position Input frequency Differential input:≤500kHz(kpps),Single-end input:≤200kHz(kpps)
Command mode Pulse+Direction;CCW pulse+CW pulse;A phase+B phase(orthogonal).
Electronic gear 1~32767/1~32767
ratio
Monitor function Speed, current position, position deviation, motor torque, motor current, command
pulse frequency, etc.
Protection function Over-speed, over-voltage, over-current, over-load, regeneration abnormal, encoder
signal abnormal, excess position deviation, etc.
Characteristc Frequency >300Hz
response of speed
Fluctuation of <±0.03%( load  0~100%);<±0.02%( power supply -15~+10%)
speed
Speed control 3.513888889

 

Model length(C) Width(D) Hight(E) Heat sink
HSD2-015 162mm 77mm 162mm 16mm
HSD2-020 170mm 77mm 172mm 16mm
HSD2-030 185mm 82mm 182mm 21mm
HSD2-050 200mm 92mm 186.2mm 31mm
HSD2-075 215mm 105mm 207mm 29.5mm

Lọc sản phẩm

Thương hiệu

Thương hiệu