Trang chủ   »   Kiến thức điện   »   Hướng Dẫn Cài Đặt Đồng Hồ Đa Năng CET PMC-33M-A

Hướng Dẫn Cài Đặt Đồng Hồ Đa Năng CET PMC-33M-A

Label  Parameters  Description  Range Default
       Menu
Main      Sub
PROGRAMMING Programming Setup Configuration / /
PASSWORD Password Enter Password 0 to 9999 0
PASS SET Enter sub Menu to change password? YES/NO NO
NEW PASS New Password Change password 0000 to 9999 “0”
SYS SET Enter sub Menu to set basic parameter? YES/NO NO
TYPE Wiring Mode Meter’s Wiring Connection DEMO/1P2W/
1P3W/3P3W/3P4W		 3P4W
PT1 PT Primary PT Primary Voltage 1 to 1,000,000V 100V
PT2 PT Secondary PT Secondary Voltage 1 to 690V 100V
CT1 CT Primary CT Primary Current 1 to 30,000A 5A
CT2 CT Secondary CT Secondary Current 1 to 5A 5A
PF P.F Convention P.F Convention IEC/IEEE/-IEEE IEC
kVA kVA Calculation kVA Calculation Method V/S
(V=vector S=Scalar)		 V
THD SET. THD Calculation Select between % of fundamental or
% of RMS		 THDF/THDR THDF
I1 REV Phase A CT Reverse Phase A CT Polarity YES/NO NO
I2 REV Phase B CT Reverse Phase B CT Polarity YES/NO NO
I3 REV Phase C CT Reverse Phase C CT Polarity YES/NO NO
BLTO Backlight Timeout 0 to 6 mins 5
COM SET Enter sub menu to set Comm. Parameter? YES/NO NO
PRO Protocol Protocol Modbus Modbus
ID Meter Address Unit ID 1-247 100
BAUD Baud Rate Data rate in bits per second 1200/2400/4800/9600
/19200/38400bps		 9600
CONFIG Comm. Port Data Format 8N2/8O1/8E1 8E1
DMD SET
PERIOD Period Demand Period 1 to 60 (min) 15
NUM Number No.of Sliding Windows 1 to 15 1
PRED RESP Predicted Response Predicted Demand Response 70 to 99 (%) 70
ENGY SET Preset Energy Values Enter sub menu to preset Energy Values YES/NO NO
LED Led Pulsing Enable kWh or kvarh LED Energy Pulsing OFF/P/Q P (kWh)
CNST Pulse Constant Pulsse Constant 1000/3200 1000
IMP kWh Import Preset kWh Import 0 to 99,,999,999.9 7803
EXP kWh Export Preset kWh Export 0 to 99,,999,999.9 7803
IMP kvarh Import Preset kvarh Import 0 to 99,,999,999.9 7803
EXP kvarh Export Preset kvarh Export 0 to 99,,999,999.9 7803
kVAh  kVAh Value 0 to 99,,999,999.9 7803
CLR SET Enter sub menu to clear data YES/NO NO
CLR ENGY Clear Energy Clear the 3Φ- total and per-phase energy
registers		 YES/NO NO
CLR MXMN Clear Max/Min Logs Clear Max/Min Log of this month
(Since Last Reset)		 YES/NO NO
CLR DMD Clear Demand Clear MaxiumDemand of this month
(Since Last Reset)		 YES/NO NO
CLR DIC Clear DI Counter Clear All DI Counter YES/NO NO
CLR SOE Clear SOE Clear SOE log YES/NO NO
CLR OPTM Clear Operating Time Clear Device Operating Time YES/NO NO
CLR ALL All data Clear All of the above YES/NO NO
TM SET Set date and time Enter sub menu to set time? YES/NO NO
DAT Date Enter the current Date YYYY-MM-DD /
CLK Clock Enter the current Time HH:MM:SS /
INFO Vew Device Information (read only) YES/NO /
FW Firmware Version Firmware Version e.g 1.00.00 means
V1.00.00		 /
PRO VER Protocol Version Protocol Version e.g 2.1 means V2.1 /
UPDAT Update Date Firmware Update Date e.g 20160603 /
Serial Number Serial Number e.g 1506005094 /

 

PMC-33M CET User Manual

Lọc sản phẩm

Thương hiệu

Thương hiệu